Pre-Owned Oneder Onederwall

The Oneder Onederwall: Dual Gain Pedal Built for a Wall of Sound

Dual Channel Fuzz Overdrive and Distortion

The Onederwall is the first dual pedal from Oneder Effects, combining two distinct gain circuits in one seriously flexible box. Channel 1 delivers an Oneder flavored Muff circuit, while Channel 2 houses the expanded Onederbolt Distortion. Between the two, the Onederwall can cover boost, overdrive, distortion, fuzzy distortion, and massive stacked gain textures. Both channels are fully functional, and the pedal shows light cosmetic wear consistent with regular use. All cosmetic wear is documented in the photoset.

Oneder Flavored Muff Channel

Channel 1 lands between Ram's Head and Russian Muff territory in terms of gain and tone. Its three position mode toggle dramatically changes the character of the circuit. The classic setting provides the familiar scooped response, the middle setting flattens the mids and gets heavier, and the third setting lifts the diodes for huge lows and maximum level. This is a channel made for going from familiar Muff textures to considerably more unruly sounds.

Onederbolt Distortion and Flexible Clipping

Channel 2 is the Onederbolt Distortion, an updated and expanded version of the Oneder Drive. Volume, Tone, and Gain controls are joined by an external bright control and a Boost switch for additional gain, top end, and sustain. A clipping toggle selects between op amp clipping for a fuller range response, additional gain, and fuzzier high gain textures, or silicon and LED hybrid clipping for a more focused midrange and vintage voiced response.

Stackable Gain with Switchable Signal Order

The real fun starts when both channels are engaged. An order toggle lets you determine which circuit hits the other first, opening up considerably different stacking possibilities without rearranging anything on your pedalboard. Channel 2 into Channel 1 can feed the Onederbolt directly into the Muff circuit, while reversing the order lets the Muff slam into the drive side. Clickless relay bypass footswitching handles channel engagement.

Pedalboard Ready Oneder Effects Design

Top mounted Neutrik jacks help keep connections organized, while the two channel layout puts a considerable range of gain under two footswitches. The pedal requires standard 9 volt center negative power through a 2.1 barrel connector, with an isolated DC supply recommended. There is no battery snap and no power supply is included. The original box is included.

Specifications

• Channel 1: Oneder flavored Muff circuit
• Channel 1 Controls: Volume, Tone, Gain
• Channel 1 Mode Toggle: Classic scooped, flat mids with more level, diode lift with heavy lows
• Channel 2: Onederbolt Distortion
• Channel 2 Controls: Volume, Tone, Gain, external bright control
• Channel 2 Boost Switch: Additional gain, top end, and sustain
• Channel 2 Clipping: Op amp clipping or silicon and LED hybrid clipping
• Signal Order: Switchable Channel 1 first or Channel 2 first
• Bypass: Clickless relay bypass footswitching
• Jacks: Top mounted Neutrik jacks
• Power Requirement: Standard 9 volt center negative power supply with 2.1 barrel connector
• Recommended Power: Isolated DC power supply
• Battery Snap: None
• Power Supply Included: No
• Included Accessories: Original box

This pre owned effects pedal ships fully insured with signature required.