Split shaft, 500K-ohm ( CTS #450S 3910 )

Split Shaft 450s

Add a switch without adding a hole. Sized to fit more guitars.
On these top quality CTS control pots, the switch contacts are on the side, not the back. This makes them shorter, so they'll fit most guitars without routingonly 1" cavity depth is needed.

The double-pole double-throw switch adds lots of wiring options. Pull the knob to coil-cut a humbucker, switch a pickup in/out, or control anything: the switch is electrically separate from the control pot.

CTS pots have long been the first choice in American guitars.CTS worked with StewMac to create these unique control pots. In addition to their space-saving size, they feature alonger-life brass shaftand tighter10% resistance tolerancecompared to CTS products offered elsewhere.

Their precision audio taper gives smoother, more accurate response than you'll get with economy pots. The volume swells evenly from 0 to 10, with no abrupt changes.

Available with split shaft for fine-knurled (24-spline) knob, or with smooth shaft to fit a set-screw knob. The long shaft #0229 fits Les Pauland other carved-top solidbodies.

Each CTS pot includes a flat washer, lock washer, and two hex mounting nuts for custom height adjustment on a pickguard or control plate.

Split shaft, fine knurling Diameter Height	0.235" (5.95mm) 3/8" (9.52mm)
Solid shaft Diameter Height	1/4" (6.35mm) 3/8" (9.52mm)
Thread	3/8" x 32
Thread height	3/8" (9.52mm)
Thread height, long shaft	3/4" (19.05mm)
Required mounting hole diameter	3/8" (9.52mm)
Required cavity depth	1" (25.4mm)